| Customization: | Available |
|---|---|
| After-sales Service: | Lifetime Service |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
IHF
Fluoroplastic centrifugal pump
Technical parameter:
IHF pump is widely used in automobile manufacturing, like acid washing,painting,in non-ferrous metal smelting,like electrolyte transportation,lonic membrane,
in caustic soda,like chlorine water treatment,wastewater treatment etc.
Suitable temperature range:-20ºC~150ºC,if it's over 95ºC,high temperature resistant material will be replaced.
Product feature:
-Standardization. ISO2858,GB5662,GB5656
-Reliable mechanical seal.
*Moving ring:Carbon fiber filled with tetrafluorine,it can be adjusted according with conveying different medias.
*Static ring:Sic,Ceramic,Pressureless sintered silicon arbide
-The impeller is molded with the steel inserts and fluorine plastic wrapped
-The pump shell is made with HT200 and F46 lining.
-The pump base material is HT200 with integral casting molding.
-The bearing generally adopts the 2RS double groove ball grease lubricating type,easy to maintain.
Keep perfect corrosion resistance,high strength,durability.
Good sealing,easy to install and maintain
Application:
-Fine Chemicals
-Biomedical
-Pesticide Medicine
-Industrial paper
-Waste Gas Treatment
-Petrochemical
-Steel Metallurgy
-Electroplating Wastewater
-Pickling and Polishing etc
Common media:
Muriatic acid,Sulfuric acid,nitric acid,ormic acid,phosphoric acid,chromic acid,brine,aqua regia,sodium hypochlorite,sodium hydroxide,dichloromethane,dichloroethyl ether,PAG,PAM solution
*IHF pumps are suitable for conveying highly corrosive chemical medias,like Muriatic acid,Nitric Acid,Organic solvents*
Explosion diagram:
Structure and material:
No. |
Model |
Flow (m3/h) |
Pump head (m) |
Efficiency (%) |
(NPSH)required (m) |
Inlet (mm) |
Outlet (mm) |
Rev (r/min) |
Power (kw) |
| 1 | IHF25-20-125 | 1.7 | 20 | 28 | 3 | 25 | 20 | 2900 | 1.1 |
| 2 | IHF25-20-160 | 1.7 | 32 | 29 | 3 | 25 | 20 | 2900 | 1.5 |
| 3 | IHF32-25-125 | 3.6 | 20 | 38 | 3 | 32 | 25 | 2900 | 1.5 |
| 4 | IHF32-25-160 | 3.6 | 32 | 39 | 3 | 32 | 25 | 2900 | 2.2 |
| 5 | IHF40-25-125 | 6.3 | 20 | 38 | 3 | 40 | 25 | 2900 | 1.5 |
| 6 | IHF40-25-160 | 6.3 | 32 | 31 | 3 | 40 | 25 | 2900 | 2.2 |
| 7 | IHF40-25-200 | 6.3 | 50 | 23 | 3 | 40 | 25 | 2900 | 5.5 |
| 8 | IHF40-32-250 | 6.3 | 80 | 24 | 3 | 40 | 32 | 2900 | 11 |
| 9 | IHF50-32-125 | 12.5 | 20 | 52 | 3.2 | 50 | 32 | 2900 | 2.2 |
| 10 | IHF50-32-160 | 12.5 | 32 | 47 | 3.2 | 50 | 32 | 2900 | 4 |
| 11 | IHF50-32-200 | 12.5 | 50 | 40 | 3.2 | 50 | 32 | 2900 | 7.5 |
| 12 | IHF50-32-250 | 12.5 | 80 | 34 | 3 | 50 | 32 | 2900 | 11 |
| 13 | IHF65-50-125 | 25 | 20 | 61 | 3.5 | 65 | 50 | 2900 | 3 |
| 14 | IHF65-50-160 | 25 | 32 | 56 | 3.5 | 65 | 50 | 2900 | 5.5 |
| 15 | IHF65-40-200 | 25 | 50 | 51 | 3.5 | 65 | 40 | 2900 | 11 |
| 16 | IHF65-40-250 | 25 | 80 | 48 | 3.5 | 65 | 40 | 2900 | 18.5 |
| 17 | IHF80-65-125 | 50 | 20 | 65 | 4 | 80 | 65 | 2900 | 5.5 |
| 18 | IHF80-65-160 | 50 | 32 | 64 | 4 | 80 | 65 | 2900 | 11 |
| 19 | IHF80-50-200 | 50 | 50 | 63 | 4 | 80 | 50 | 2900 | 15 |
| 20 | IHF80-50-250 | 50 | 80 | 56 | 4.5 | 80 | 50 | 2900 | 30 |
| 21 | IHF100-80-125 | 100 | 20 | 65 | 4.5 | 10 | 80 | 2900 | 11 |
| 22 | IHF100-80-160 | 100 | 32 | 70 | 3 | 100 | 80 | 2900 | 15 |
| 23 | IHF100-65-200 | 100 | 50 | 68 | 3 | 100 | 65 | 2900 | 30 |
| 24 | IHF100-65-250 | 100 | 80 | 65 | 3 | 100 | 65 | 2900 | 45 |
| 25 | IHF125-100-160 | 160 | 32 | 68 | 3 | 125 | 100 | 2900 | 30 |
| 26 | IHF125-100-200 | 200 | 50 | 67 | 3 | 125 | 100 | 2900 | 55 |
| 27 | IHF125-100-250 | 200 | 80 | 62 | 3 | 125 | 100 | 2900 | 75 |
| *The above is equipped with a two-stage motor. | |||||||||
No. |
Model |
Flow (m3/h) |
Pump head (m) |
Efficiency (%) |
(NPSH)required (m) |
Inlet (mm) |
Outlet (mm) |
Rev (r/min) |
Power (kw) |
| 1 | IHF32-25-125 | 1.8 | 5 | 38 | 3 | 32 | 25 | 1450 | 0.55 |
| 2 | IHF32-25-160 | 1.8 | 8 | 39 | 3 | 32 | 25 | 1450 | 0.55 |
| 3 | IHF40-25-160 | 4 | 8 | 32 | 3 | 40 | 25 | 1450 | 0.55 |
| 4 | IHF40-25-200 | 4 | 12 | 23 | 3 | 40 | 25 | 1450 | 1.1 |
| 5 | IHF40-32-250 | 4 | 20 | 24 | 3 | 40 | 32 | 1450 | 1.5 |
| 6 | IHF50-32-125 | 6.3 | 5 | 52 | 3.2 | 50 | 32 | 1450 | 0.55 |
| 7 | IHF50-32-160 | 6.3 | 8 | 47 | 3.2 | 50 | 32 | 1450 | 0.55 |
| 8 | IHF50-32-200 | 6.3 | 12.5 | 40 | 3.2 | 50 | 32 | 1450 | 1.1 |
| 9 | IHF50-32-250 | 6.3 | 20 | 34 | 3 | 50 | 32 | 1450 | 1.5 |
| 10 | IHF65-50-125 | 12.5 | 5 | 61 | 3.5 | 65 | 50 | 1450 | 0.55 |
| 11 | IHF65-50-160 | 12.5 | 8 | 56 | 3.5 | 65 | 50 | 1450 | 1.1 |
| 12 | IHF65-40-200 | 12.5 | 12.5 | 51 | 3.5 | 65 | 40 | 1450 | 1.5 |
| 13 | IHF65-40-250 | 12.5 | 20 | 48 | 3.5 | 65 | 40 | 1450 | 3 |
| 14 | IHF80-65-125 | 25 | 5 | 65 | 3 | 80 | 65 | 1450 | 1.1 |
| 15 | IHF80-65-160 | 25 | 8 | 64 | 4 | 80 | 65 | 1450 | 1.5 |
| 16 | IHF80-50-200 | 25 | 12.5 | 63 | 4 | 80 | 50 | 1450 | 2.2 |
| 17 | IHF80-50-250 | 25 | 20 | 56 | 4.5 | 80 | 50 | 1450 | 3 |
| 18 | IHF100-80-125 | 50 | 5 | 65 | 4.5 | 100 | 80 | 1450 | 1.5 |
| 19 | IHF100-80-160 | 50 | 8 | 70 | 3 | 100 | 80 | 1450 | 3 |
| 20 | IHF100-65-200 | 50 | 12.5 | 68 | 3 | 100 | 65 | 1450 | 5.5 |
| 21 | IHF100-65-250 | 50 | 20 | 65 | 3 | 100 | 65 | 1450 | 7.5 |
| 22 | IHF125-100-160 | 80 | 8 | 64 | 3 | 125 | 100 | 1450 | 5.5 |
| 23 | IHF125-100-200 | 100 | 12.5 | 65 | 3 | 125 | 100 | 1450 | 11 |
| 24 | IHF125-100-250 | 100 | 20 | 68 | 3 | 125 | 100 | 1450 | 15 |
| 25 | IHF150-125-250 | 200 | 20 | 65 | 3 | 150 | 125 | 1450 | 22 |
| 26 | IHF150-125-315 | 200 | 32 | 63 | 3 | 150 | 125 | 1450 | 45 |
| 27 | IHF150-125-400 | 200 | 50 | 62 | 3 | 150 | 125 | 1450 | 75 |
| 28 | IHF200-150-250 | 400 | 20 | 63 | 3 | 200 | 150 | 1450 | 55 |
| 29 | IHF200-150-315 | 400 | 32 | 64 | 3 | 200 | 150 | 1450 | 75 |
| 30 | IHF200-150-400 | 400 | 50 | 62 | 3 | 200 | 150 | 1450 | 110 |
| *The above is equipped with a four-stage motor. | |||||||||
1.The media with magnetic impurities or solid impurities are prohibited conveying by the fluoroplastic centrifugal pump.If does, magnetic filter should be used. And it's not suitable to convey the medium that produces a large amount of crystallization after stopping.
2.It's not allowed to work at rated flow of less than 30%.
3.If the density of the media conveyed by the pump is >1200kg/m3, the motor power should be increased accordingly.
4.Max work pressure of the mechanical seal is 1.0Mpa .If the pressure is over 1.0Mpa,the stop ring will be equipped accordingly.
5.When conveying media with low conductivity,such as ultra-pure water,organic solvents,relevant measures should be done to release the static electricity produced by the running pump to prevent electrostatic damage.
6.Special medium need be equipped special grinding parts,like Hydrofluorik acid with pressureless sintering of silicon carbie,Nitric acid with ceramis or silicon carbide.
7.The mechanical seal should be replaced after the theoretical service life 2500hours.Regular maintenance will increase the service life accordingly.
8.Warranty: 12 months.
Optional parts:
| No. | Optional parts | Description |
| 1 | Electrostatic conductivity | Prevention of fire and explosion |
| 2 | Double sides mechanical seals | Withstand a certain high temperature |
| 3 | Insulation sleeve | Protect pump cavity |
| 4 | High temperature resistant material | Suitable temperature range:100ºC~160ºC |
| 5 | Motor protection equipment | Cut off power when overload, low load and lack of phase |
| 6 | Customized motor | Special requirements |
| 7 | Customized flange | Special requirements |
Fragile parts:
Impeller,Mechanical seal,Pump cover,Pressure seal cover,Reinforcing bolt.
We have enough stock for these fragile parts.
SINO INDUSTRIAL EQUIPMENT CO.,LTD. is a branch company of Sinogym Fitnesss which mainly export
-Chemical Pump & Valve
-Industrial Motor
-Spare Parts accordingly
Chemical pump & valve refers to fluoroplastic magnetic pump,stainless steel magnetic pump, fluoroplastic centrifugal pump,stainless steel centrifugal pump and spare parts accordingly etc.
The chemical pump we export is widely used in such industries as petrochemicals, acid / alkali making, non-ferrous smelting, acid wash in automobile manufacturing, rare earth separation, pesticides, dyes, pharmaceuticals, papermaking, elec-tro-plating and radio.It has different product series.
The industrial motor cover YE3, YE4, VE5 high efficiency motor, low voltage high power, explosion-proof, high voltage, frequency conversion, braking, Z4 value flow, split horsepower, stainless steel, NEMA standard, new energy vehicle motor, electric forklift traction motor and so on. There are more than 50 series and more than 10000 basic specifications. Meanwhile we also develop non-standard motor for our customers.
Export products cover EU IEC standard, North American NEMA standard and Japanese JIS standard.
Our factory has 30 years and 60 years of manufacturing experience for pump and motor separately.
We work closely with our customers to provide products that meet their demanding specifications, quality and delivery requirements.
We welcome all inquiries and will answer any questions promptly. We will work closely with you to facilitate the successful procurement of the orders you place with us to provide a product that will be produced to your specifications and quality requirements in a timely manner and reasonable priced.
Please contact us about your product interest (large or small qty) and any relevant information.
We assure you of our immediate reply with the hope we can will develop and long and profitable relationship together based on our performance and integrity.
Sincerely,
Sino Industrial Equipment Co.,Ltd.
-Professional supplier of industrial equipment.
-Timely,Professional,Concentrative,Patient .
Thank you for your kindly attention to our company.
Whatever if you are interested in our products or want to know more about your interested products,please let us know.
We are happy to answer any of your inquiry and give your help as possible as we can.
Q1: ARE YOU A MANUFACTURER OR TRADING COMPANY?
We are not only a trading company but also a manufacturer. Welcome to visiting our factory.
Q2:WHAT PRODUCTS AR YOU DEALING WITH?
We mainly export chemical pump,valves,pipe fitting and industrial motor.
Chemical pump & valve refers to fluoroplastic magnetic pump,stainless steel magnetic pump, fluoroplastic centrifugal pump,stainless steel centrifugal pump and spare parts accordingly etc.
The chemical pump we export is widely used in such industries as petrochemicals, acid / alkali making, non-ferrous smelting, acid wash in automobile manufacturing, rare earth separation, pesticides, dyes, pharmaceuticals, papermaking, elec-tro-plating and radio.It has different product series.
The industrial motor cover YE3, YE4, VE5 high efficiency motor, low voltage high power, explosion-proof, high voltage, frequency conversion, braking, Z4 value flow, split horsepower, stainless steel, NEMA standard, new energy vehicle motor, electric forklift traction motor and so on.
Q3:WHY CHOOSE US?
Advantage:
-Professional service.
-Low MOQ to start small business.
-Reasonable price with better quality.
-Timely reply.
-Quality guarantee.
-On-time delivery.
-Better after service.
Q4: WHAT IS YOUR MINIMUM QUANTITY?
No MOQ.1pc is also fine..
Q5:CAN YOU SUPPLY SAMPLES?
Yes,we are very glad to offer you samples.
However the express courier cost from our company to your required address will be upon your account.
Usually we use DHL,TNT,UPS,FEDEX or EMS as the courier.
It will take 3-7 days to arrive many Europe countries and North America.
Which express courier we will use, it's up to your convenient or the express charge.
Q6: What's your payment terms?
40% downpayment by T/T after confirmed the PI, the balance will be paid before shipment.
Q7:WHAT IS THE SHIPPING TERMS YOU CAN OFFER?
Different trade terms can be provided,such as EXW,FOB,CFR,CIF,DDU,DDP etc.
Q8:What is your lead time?
Normally 15-20 days. The lead time will be adjusted according with the details of order.
Q9: HOW TO CUSTOMIZE PUMP AND MECHANICAL SEALS?
Application data will be required,we will recommend suitable pump and seal type according with data.Or you could send us drawings, We are well in OEM and ODM.
Q10:WHAT INFORMATION SHOULD WE OFFER FOR QUOTATION?
| Table for Pump Selection | |||
| 1 | Name of medium | ||
| 2 | Medium density: | (kg/m3) | |
| 3 | Ph of Medium | ||
| 4 | Medium viscosity | ||
| 5 | Medium temperature: | (°C) | |
| 6 | Does the medium contain particles and crystals? | YES NO | (Yes or no) |
| 7 | Variance of ambient temperature | During °C ~ °C | |
| 8 | Range of working temperature | During °C ~ °C | |
| 9 | Required Flow range: | From m3/h to m3/h | |
| 10 | Required pump head range: | From m to m | |
| 11 | Voltage: | (V) | |
| 12 | Frequency: | (Hz) | |
| 13 | Power: | (Kw) | |
| 14 | Motor type: | Common motor | |
| Explosion proof motor | |||
| 15 | Structure of pump | ||
| 16 | Material of pump | ||
| 17 | Function of self-priming | YES NO | (Yes or no) |
| 18 | Height of self-priming | (m) | |
| 19 | Size of outlet flange | ||
| 20 | Size of inlet flange | ||
| 21 | Working condition: | Upward suction | |
| Backflow | |||
| Siphon | |||
| Backup pump | |||
| *Please fill the above table as details as possible,thanks. | |||
Q11:HOW ABOUT THE WARRANTY?
1 year for main construction warranty.
Q12.WHO WILL BE RESPONSIBLE FOR THE AFTER-SALE SERVICE?
Around the world, There is always a distributor nearby who has factory-trained filed specialists to provide one-to-one services to you.If not,we also have several professional after-sales service teams in China.We will follow up the client's comments ,then help them get the best solution for maximizing the equipment efficiency and plant maintenance needs.
For large order, we can send our service team to go abroad to assemble and test.
Q13:HAVE YOU SHOWED ALL OF YOUR PRODUCTS IN YOUR WEBSITE?
No,just part of our products have been showed in our site.
If you are looking for relative industrial products,please feel free to contact us.
Customized logo is acceptable!
OEM orders are welcome!
Buyer designs are workable!
Http://sinogymfitness.en.made-in-china.com
){kind=link}